FenceEasy™ Fence Post Repair & Staked Straightener Bracket
FenceEasy™ Fence Post Repair & Staked Straightener Bracket
These repair stakes and fence straightener brackets give you a simple way to fix leaning or weakened fence posts without replacing the full post. They help you bring the post back to a straight position and keep it stable, saving time and avoiding the cost of digging out old concrete footings. Each stake has a sharp triangular point at the bottom, allowing you to drive it into the soil without digging a hole. This makes the repair process fast, tidy and suitable for most garden fences.
The brackets are designed to sit flat against the post while the long stake section drives deep into the ground. With an offset spike for extra leverage, the bracket supports the post from the side and helps keep it upright. There are five fixing holes at the back of the bracket, each 7.5mm in diameter, giving you a strong connection between the stake and the timber post. These repair stakes are suitable for most wooden fence posts and can be used on fences set in concrete. If extra support is needed, the stakes themselves can also be concreted in.
Installation is simple and does not require concrete. Once the leaning post is pushed back into a straight position, the fence straightener bracket can be pressed into the soil and then driven down using a rubber mallet. After securing the post to the bracket with screws, the repair is complete. This method strengthens the post, helps stop further leaning and offers a reliable fix for old, weakened or rotting posts. They are ideal for garden fences, boundary lines and general home maintenance where you want a safe and stable setup without replacing large sections of your fence.
Each fence straightener bracket is made from heavy duty British steel, giving long lasting strength and resistance to corrosion. You can choose between textured black or galvanised steel finishes to suit your fence style. Both options provide strong protection from rust, helping the brackets last through year round weather conditions. Designed in the UK, these brackets provide a tough, dependable solution for quick fence repairs.
Key Features:
- Strong support - Helps straighten and stabilise leaning fence posts without removing old concrete or replacing the post
- Quick installation - Triangular pointed stake drives into the soil with ease, avoiding the need to dig holes or mix concrete
- Secure fixing - Five 7.5mm holes allow firm attachment between the bracket and fence post for added strength
- Universal fit - Suitable for most wooden fence posts and can be used on fences already set in concrete
- Durable build - Heavy duty British steel provides strength, long life and reliable resistance to rust and wear
- Finish options - Available in textured black or galvanised steel to suit garden styles and offer strong weather protection
Installation Instructions:
- Start by finding the fence post that is leaning. Push the fence back into its upright position. Use a level to check that the post is straight. You may need someone to hold the fence steady while you work.
- Take the fence straightener bracket and place it flat against the fence post. Make sure the pointed stake is above the ground at this stage. Check again that the fence post is vertical. When everything is lined up, slide the bracket straight down and press it into the soil as far as you can.
- Keep the fence held in the correct position. Use a rubber mallet to drive the stake the rest of the way into the ground. Avoid using a metal hammer, as this can damage the coating and may lead to rust over time.
- Once the stake is fully driven into the soil, drill small pilot holes through each fixing hole on the bracket. This helps stop the wood from splitting when you add the screws.
- Finally, secure the fence straightener bracket to the fence post using suitable screws. When both brackets are in place, the fence post should stay upright and stable.
Dimensions:
- Width: 90mm
- Thickness: 2mm
- Height (above ground): 400mm
- Height (below ground): 400mm
- Depth: 120mm
- Total Height: 800mm
- Hole Size: 7.5mm Ø
Please note:
- No fixings or screws are provided with these fence straightener brackets.
Original: $28.18
-65%$28.18
$9.86More Images
FenceEasy™ Fence Post Repair & Staked Straightener Bracket
FenceEasy™ Fence Post Repair & Staked Straightener Bracket
These repair stakes and fence straightener brackets give you a simple way to fix leaning or weakened fence posts without replacing the full post. They help you bring the post back to a straight position and keep it stable, saving time and avoiding the cost of digging out old concrete footings. Each stake has a sharp triangular point at the bottom, allowing you to drive it into the soil without digging a hole. This makes the repair process fast, tidy and suitable for most garden fences.
The brackets are designed to sit flat against the post while the long stake section drives deep into the ground. With an offset spike for extra leverage, the bracket supports the post from the side and helps keep it upright. There are five fixing holes at the back of the bracket, each 7.5mm in diameter, giving you a strong connection between the stake and the timber post. These repair stakes are suitable for most wooden fence posts and can be used on fences set in concrete. If extra support is needed, the stakes themselves can also be concreted in.
Installation is simple and does not require concrete. Once the leaning post is pushed back into a straight position, the fence straightener bracket can be pressed into the soil and then driven down using a rubber mallet. After securing the post to the bracket with screws, the repair is complete. This method strengthens the post, helps stop further leaning and offers a reliable fix for old, weakened or rotting posts. They are ideal for garden fences, boundary lines and general home maintenance where you want a safe and stable setup without replacing large sections of your fence.
Each fence straightener bracket is made from heavy duty British steel, giving long lasting strength and resistance to corrosion. You can choose between textured black or galvanised steel finishes to suit your fence style. Both options provide strong protection from rust, helping the brackets last through year round weather conditions. Designed in the UK, these brackets provide a tough, dependable solution for quick fence repairs.
Key Features:
- Strong support - Helps straighten and stabilise leaning fence posts without removing old concrete or replacing the post
- Quick installation - Triangular pointed stake drives into the soil with ease, avoiding the need to dig holes or mix concrete
- Secure fixing - Five 7.5mm holes allow firm attachment between the bracket and fence post for added strength
- Universal fit - Suitable for most wooden fence posts and can be used on fences already set in concrete
- Durable build - Heavy duty British steel provides strength, long life and reliable resistance to rust and wear
- Finish options - Available in textured black or galvanised steel to suit garden styles and offer strong weather protection
Installation Instructions:
- Start by finding the fence post that is leaning. Push the fence back into its upright position. Use a level to check that the post is straight. You may need someone to hold the fence steady while you work.
- Take the fence straightener bracket and place it flat against the fence post. Make sure the pointed stake is above the ground at this stage. Check again that the fence post is vertical. When everything is lined up, slide the bracket straight down and press it into the soil as far as you can.
- Keep the fence held in the correct position. Use a rubber mallet to drive the stake the rest of the way into the ground. Avoid using a metal hammer, as this can damage the coating and may lead to rust over time.
- Once the stake is fully driven into the soil, drill small pilot holes through each fixing hole on the bracket. This helps stop the wood from splitting when you add the screws.
- Finally, secure the fence straightener bracket to the fence post using suitable screws. When both brackets are in place, the fence post should stay upright and stable.
Dimensions:
- Width: 90mm
- Thickness: 2mm
- Height (above ground): 400mm
- Height (below ground): 400mm
- Depth: 120mm
- Total Height: 800mm
- Hole Size: 7.5mm Ø
Please note:
- No fixings or screws are provided with these fence straightener brackets.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
FenceEasy™ Fence Post Repair & Staked Straightener Bracket
These repair stakes and fence straightener brackets give you a simple way to fix leaning or weakened fence posts without replacing the full post. They help you bring the post back to a straight position and keep it stable, saving time and avoiding the cost of digging out old concrete footings. Each stake has a sharp triangular point at the bottom, allowing you to drive it into the soil without digging a hole. This makes the repair process fast, tidy and suitable for most garden fences.
The brackets are designed to sit flat against the post while the long stake section drives deep into the ground. With an offset spike for extra leverage, the bracket supports the post from the side and helps keep it upright. There are five fixing holes at the back of the bracket, each 7.5mm in diameter, giving you a strong connection between the stake and the timber post. These repair stakes are suitable for most wooden fence posts and can be used on fences set in concrete. If extra support is needed, the stakes themselves can also be concreted in.
Installation is simple and does not require concrete. Once the leaning post is pushed back into a straight position, the fence straightener bracket can be pressed into the soil and then driven down using a rubber mallet. After securing the post to the bracket with screws, the repair is complete. This method strengthens the post, helps stop further leaning and offers a reliable fix for old, weakened or rotting posts. They are ideal for garden fences, boundary lines and general home maintenance where you want a safe and stable setup without replacing large sections of your fence.
Each fence straightener bracket is made from heavy duty British steel, giving long lasting strength and resistance to corrosion. You can choose between textured black or galvanised steel finishes to suit your fence style. Both options provide strong protection from rust, helping the brackets last through year round weather conditions. Designed in the UK, these brackets provide a tough, dependable solution for quick fence repairs.
Key Features:
- Strong support - Helps straighten and stabilise leaning fence posts without removing old concrete or replacing the post
- Quick installation - Triangular pointed stake drives into the soil with ease, avoiding the need to dig holes or mix concrete
- Secure fixing - Five 7.5mm holes allow firm attachment between the bracket and fence post for added strength
- Universal fit - Suitable for most wooden fence posts and can be used on fences already set in concrete
- Durable build - Heavy duty British steel provides strength, long life and reliable resistance to rust and wear
- Finish options - Available in textured black or galvanised steel to suit garden styles and offer strong weather protection
Installation Instructions:
- Start by finding the fence post that is leaning. Push the fence back into its upright position. Use a level to check that the post is straight. You may need someone to hold the fence steady while you work.
- Take the fence straightener bracket and place it flat against the fence post. Make sure the pointed stake is above the ground at this stage. Check again that the fence post is vertical. When everything is lined up, slide the bracket straight down and press it into the soil as far as you can.
- Keep the fence held in the correct position. Use a rubber mallet to drive the stake the rest of the way into the ground. Avoid using a metal hammer, as this can damage the coating and may lead to rust over time.
- Once the stake is fully driven into the soil, drill small pilot holes through each fixing hole on the bracket. This helps stop the wood from splitting when you add the screws.
- Finally, secure the fence straightener bracket to the fence post using suitable screws. When both brackets are in place, the fence post should stay upright and stable.
Dimensions:
- Width: 90mm
- Thickness: 2mm
- Height (above ground): 400mm
- Height (below ground): 400mm
- Depth: 120mm
- Total Height: 800mm
- Hole Size: 7.5mm Ø
Please note:
- No fixings or screws are provided with these fence straightener brackets.
